DeliverEnd
Delivery and driver apps - USA
AR BIM CONSTRUCTION VERIFICATION
Custom AR BIM verification for your construction sites.
We build AR BIM tools that overlay your Revit and IFC models onto the real site, so your teams verify what was built against the design and catch clashes before they become rework. Not an app you rent. A custom platform we build around your workflow and hand over as yours.
As-Built VerificationIFC · Revit · NavisworksReal-Time AR Overlay±2 cm On-Site Accuracy
AR BIM LIVE SIMULATION
AR BIM DEVELOPMENT ·
LIDAR PRECISION ·
IFC · REVIT · NWD ·
3D RECONSTRUCTION ·
CLASH DETECTION ·
AS-BUILT VERIFICATION ·
BIM COORDINATION ·
AR VR SOLUTIONS ·
SWIFT IOS · UNITY · ARKIT · LIDAR · FORGE ·
REAL-TIME OVERLAY ·
POINT CLOUD CAPTURE ·
ON-SITE VALIDATION ·
CONSTRUCTION TECH ·
DELTAARBIM ·
AR BIM DEVELOPMENT ·
LIDAR PRECISION ·
IFC · REVIT · NWD ·
3D RECONSTRUCTION ·
CLASH DETECTION ·
AS-BUILT VERIFICATION ·
BIM COORDINATION ·
AR VR SOLUTIONS ·
SWIFT IOS · UNITY · ARKIT · LIDAR · FORGE ·
REAL-TIME OVERLAY ·
POINT CLOUD CAPTURE ·
ON-SITE VALIDATION ·
CONSTRUCTION TECH ·
DELTAARBIM ·
AR BIM DEVELOPMENT ·
LIDAR PRECISION ·
IFC · REVIT · NWD ·
3D RECONSTRUCTION ·
CLASH DETECTION ·
AS-BUILT VERIFICATION ·
BIM COORDINATION ·
AR VR SOLUTIONS ·
SWIFT IOS · UNITY · ARKIT · LIDAR · FORGE ·
REAL-TIME OVERLAY ·
POINT CLOUD CAPTURE ·
ON-SITE VALIDATION ·
CONSTRUCTION TECH ·
DELTAARBIM ·
Our product · DeltaARBIM
DeltaARBIM: our AR BIM verification platform.
DeltaARBIM is Shivlam's own product. We designed and built the AR BIM verification platform end to end, and it is live on three job sites: two commercial complexes and a hospital.The app overlays live 3D models (structure, walls, MEP pipes, HVAC layers) onto the real construction site through the device camera, so site teams verify what was built against the model and catch deviations on the spot. It reads IFC natively, works offline with no markers, and holds ±2 cm on site.The same team builds custom AR BIM tools for clients, on the same engine.
LIVE NOW · deltaarbim.tech
Detect clashes
Check every layer against the model before a brick is laid. AR clash detection removes costly on-site surprises.
Reduce rework
Cut on-site rework by catching deviations from the design before they escalate.
built by ShivlamSpecialisation
Advanced AR VR Solutions for the AEC Industry.
High-fidelity 3D reconstruction, immersive AR/VR walkthroughs, and LiDAR-ready iOS device support, engineered for field-first performance and real construction environments.
±2 cm
On-Site Accuracy
60fps
AR Render Rate
IFC
Native BIM Format
3D Reconstruction
High-fidelity 3D models for as-built records, retrofitting, and digital twins. We turn LiDAR-captured point clouds into precise BIM deliverables that work with IFC, Revit (RVT), and Navisworks (NWD).
LIDAR · POINT CLOUD · PhotogrammetryAR VR Solution
Interactive AR/VR walkthroughs and immersive stakeholder validation for the AEC industry. From early design review to final construction sign-off, experience your project fully spatial and fully real, before a brick is laid.
AR · VR · UNITY · Immersive WalkthroughLiDAR Device Support
Native iOS LiDAR integration with Swift and Unity for zero-latency AR performance. Full support for iPhone Pro and iPad Pro LiDAR sensors, so AEC teams scan, model, and verify sites directly from mobile devices.
SWIFT · XCODE · ARKIT · iOS LiDARBIM OVERLAY LIVE
DELTAARBIM // OT WING, LIVE SCAN
CLASH DETECTION ON
0
CLASHES
6
IFC LAYERS
99.1%
OT ALIGN
PASS
PRESSURE
OT-1 slab: raised floor aligned within 1.5mm
0:02s
HVAC supply duct: positive pressure route confirmed
0:04s
Med gas O₂ line: wall outlet positions validated
0:07s
Plumbing riser: no clash with electrical conduit
0:9s
OT rated walls: double-layer isolation verified
0:11s
OT-1 ZERO CLASHES
HVAC POSITIVE PRESSURE OK
MED GAS O₂ LINE MAPPED
PLUMBING RISER SYNCED
ELECTRICAL CONDUIT CLEAR
6 IFC LAYERS ACTIVE
OT ALIGNMENT 99.1%
RATED WALL VERIFIED
OT-1 ZERO CLASHES
HVAC POSITIVE PRESSURE OK
MED GAS O₂ LINE MAPPED
PLUMBING RISER SYNCED
ELECTRICAL CONDUIT CLEAR
6 IFC LAYERS ACTIVE
OT ALIGNMENT 99.1%
RATED WALL VERIFIED
OT WING // LAYER BREAKDOWN
Structure + Equipment
Concrete columns, floor slab, ceiling slab, and the OT raised sub-floor for drainage. Includes OT table, surgical light, and scrub sink as IFC equipment elements.
Walls: OT Rated
Double-thick rated walls around OT-1 for acoustic and pressure isolation. Corridor partitions with door openings. Scrub room and utility room partitions in standard grey.
HVAC: Positive Pressure
Main supply duct along corridor ceiling with branch into OT-1. Cross-distribution duct and return air at a lower height. Scrub room gets a separate branch. Critical for OT sterility.
CLASH DETECTION ON
Plumbing + Drainage
Vertical riser in utility room feeds scrub sink supply. Brown-tinted drainage lines run under the OT raised floor, in the IFC waste colour standard.
Medical Gas: O₂, N₂O, Vacuum
Yellow IFC-standard lines. Vertical riser from utility manifold, horizontal feed at 1.8m wall-outlet height into OT-1. Stubs mark gas outlet positions for anaesthesia and surgical use.
Electrical: Backup Power
Cable tray along corridor ceiling branches into OT-1 for surgical lights and UPS-backed outlets. Vertical conduit riser in utility room connects to distribution board.
Our clients
Our clients are celebrating success.
TECHNICAL STACK & EXPERIENCE
Scalable AR BIM delivery,
for AEC teams worldwide.
Battle-tested AR BIM delivery experience, backed by a modern AR development stack and the engineering systems to ship reliably at enterprise scale.
10+
Years of Engineering Experience, across enterprise technology, mobile, web, and immersive AR.
2022
Shivlam Founded, and since then building AR BIM platforms and AEC systems that run on real sites.
50+
Projects Delivered, from AR mobile apps and LiDAR-powered construction tools to enterprise web platforms.
Our Core Technology Stack
Swift Native iOSUnityARKitApple ARKit - LiDARAutodesk ForgePixyz PluginTridifyVIMPython
Shivlam delivered our iOS and Android apps ahead of schedule with flawless architecture. Their communication across time zones was effortless, and the final build exceeded our expectations.
01 / 05
Testimonial 1 of 5: Shivlam delivered our iOS and Android apps ahead of schedule with flawless architecture. Their communication across time zones was effortless, and the final build exceeded our expectations.
FAQ
What construction teams ask before an AR BIM pilot.
What is AR BIM verification and how does it work?
AR BIM verification overlays your approved 3D model onto the real construction site through a phone, tablet, or headset camera. Your team walks the space, sees the model at 1:1 scale, and checks that what was built matches what was designed, catching clashes and deviations on the spot.
How accurate is AR for as-built verification?
Accuracy depends on the device and site setup. On the platform we built for DeltaARBIM, the AR overlay holds alignment to within about 2 cm on live sites. We agree the accuracy target with you before a build so it fits your tolerances.
What hardware do we need?
LiDAR-equipped iPhone Pro and iPad Pro cover most field work, and headsets like Apple Vision Pro or Magic Leap suit hands-free use. We recommend the right mix for your workflow during scoping.
Which BIM tools does it work with?
We build around your existing stack, including IFC, Autodesk Revit, and Navisworks. If you use Autodesk Construction Cloud or another source, we connect to it during the build.
Do we own the tool, or is it a subscription?
You own it. We build a custom tool around your workflow and hand over the software, rather than charging a per-seat subscription.
How does AR reduce rework on site?
It catches deviations from the model before they are built on, so errors get fixed on screen instead of after installation. Less rework means fewer delays and lower cost.
Let's build it
Tell us what you want to build.
A short brief is enough. We will come back with scope, timeline and a real estimate.